Wall System A Series 1.1

Timber C16
Kit Thickness: 45x145mm
U Value: 0.17 W/m2K

Wall System Series 1.1A Series 1.1
Wall system structural thickness145mm
U Value W/m2K
(Block & Render Finish by others)
0.17 W/m2K
Timber Fraction - Structure vs InsulationTimber
(Based on a 2.4m wide by 2.4m high by
structural wall thickness depth )
Timber cold/thermal bridge transference
(Based on a 2.4m wide by 2.4m high panel)
Breather MembraneReflective
Panel SheathingOSB 3
Timber Frame Structure45x145mm
C16 Timber
Insulation Within Structure035-Wool to
suit thickness
Vapour control layerReflective
Internal Insulated Board25mm PUR
Service Void / Battens38mm
Plasterboard12.5mm TE
All wall rendering images are for visual aid only and may not truly represent the finished look of the timber frame system depending all products and materials used. Always be sure to thoroughly discuss all aspects of your wall system, ensuring all materials are to your understanding.
Due to occasional updating of building regulations, material costs, availability and ACJ Group continuous product improvement, specifications are subject to change without prior notification.
This calculation has been produced by an independent company and are based on timber frame walls designed by ACJ Group incorporating wool products and a generic polyurethane foam. The U-value is based on a range of enhanced U-values in the floors, walls, and roofs. The U-values for the floors and roofs are standardised for ease of use elements. The calculations were undertaken using software in accordance with BS EN 10211 and BR 497.Calculations based on insulated concrete ground floor by other.